AEG Thyro-S H1 manual Contents

Contents

1.	Introduction	5
1.1	General	5
1.2	Special features	5
1.3	Type designation	5
1.4	Abbreviations	5
1.5	Warranty	5

2.	Safety	6
2.1	Identification in the operating instructions	6
2.2	General danger information	6
2.3	Operator requirements	7
2.4	Personnel requirements	7
2.5	Intended use	7
2.6	Use of the device	7
2.6.1	Operation	7
2.6.2	Prior to installation / commissioning	8
2.6.3	Maintenance, service, faults	8
2.6.4	Transport	8

3.	Functions	9
3.1	Processing the setpoint Thyro-S	9
3.2	Processing the setpoint Thyro-A	9
3.3	Processing the setpoint Thyro-Step Controller	10
3.4	Freely addressable digital outputs	10

4.	Installation	11
4.1	Connection terminals (overview)	11
4.2	Connecting a 24 V power supply	11
4.3	Connecting the power controller to X1-X8	11
4.4	Connecting the Ethernet bus module to the master	11

5.	Settings	12
5.1	Setting the protocol	12
5.2	Setting the number of slots	12
5.3	Setting the device name	12
5.4	Operating display of the bus module	13

6.	Operation	14
6.1	Start configuration (parameterization)	14
6.2	Cyclical data transmission (configuration)	14
6.3	Input and output data Thyro-S	14
6.4	Input and output data Thyro-A	16
6.5	Input and output data Thyro-Power Manager	23
6.6	Input and output data Thyro-Step Controller	24
6.7	Input and output data Thyro Input / Output Unit	24
6.8	Input and output data Thyro- Measurerment Unit	25
6.9	Acyclic data transmission (parameterization)	26

7.	External connections	27
7.1	Power supply	27
7.2	Operating elements and terminal blocks	28
8.	Interfaces	29
8.1	System interface	29
8.2	Ethernet interface	29

2