Periodic Routine Maintenance
Periodic Routine Maintenance

Table 5-1 lists the printer’s periodic routine maintenance and indicates when this maintenance should be performed.

Table 5–1 Periodic Routine Maintenance

Maintenance

When to perform

Replace toner bottle and

When the message display indicates

cleaner pad

TONER LOW or TONER EMPTY,

 

orÊ when printing is too light

 

 

Replace print unit

When print quality is bad, even after

 

replacing or cleaning other parts

 

When the message display indicates

 

<CLEAR WARNING> PRINT UNIT

 

(Replace the print unit at the next

 

replacement of the toner bottle)

 

 

Clean corona wire

When replacing the print unit or toner

 

bottle, when printout shows vertical

 

white lines, or when printing is too light

 

 

Clean paper path

When replacing the print unit or toner

 

bottle, after clearing a paper jam, or

 

when printouts show toner smudging

 

 

Clean precharger wire

When print density is uneven or when

 

printing shows black vertical lines

Replacing the Toner Bottle and Cleaner Pad

The toner bottle and cleaner pad are packaged together as a toner kit and must be replaced at the same time. The cleaner pad is also available in a cleaner kit.

The toner bottle is designed to last approximately 5000 printed pages under the condition of 5% coverage on A4 paper or last about one year after unpacking. The first toner bottle may print slightly fewer pages.

Replace the toner bottle and the cleaner pad when the message display indicates TONER LOW or TONER EMPTY or when printing becomes lighter than you find satisfactory. After the toner low condition occurs,

5-2

User’s Manual