Setting Up
To prepare the print unit and install the toner bottle, follow these steps:
1. Open the upper door. Lift the milled portions at the front left and right of the upper door to open it.
e
w q
2.Remove the protective materials from the print unit. Remove protective sheet q. Pull clear tape w until its blue end is visible and remove it. Remove two restraint cushions e.
3.Remove the toner bottle from its bag.
4.Shake the toner bottle by moving it back and forth in a horizontal motion several times.
5.Remove the plastic seal from the toner bottle. Gently pull off the seal being
careful not to spill toner. Handle to seal carefully to avoid staining your hands or clothes.
Projecting guide
User’s Manual |