Printing Your First Document

Printing Your First Document

Your printer should be set up and connected to your computer. This section explains how to test your installation setup by printing a trial document from an application program under Windows. To test the printer alone, without your computer, you can use the status report printing which does not require the use of a computer. See Printing a Status Report in Chapter 3.

Turn on your printer and observe the initialization sequence. If no RAM (extra memory) cards have been installed, the sequence lasts about one minute, during which the following events occur:

•The printer conducts a number of self-checks.

•The main motor rotates to check mechanical functions and clean the drum.

•The message display indicates READY, indicating the printer is ready for printing.

The following procedures show you how to print your trial document.

To print a trial document, follow these steps:

1.Start Windows and a Windows application.2.Open your trial document.

Select an existing or start a new document. Choose a small document for the first trial.

3.Select PP14ADV as the document printer.

In most programs, you make the selection in a print menu. Consult your program documentation for the exact procedure.

4.If desired, change the font(s) in the document to one of the fonts offered by your application.

5.Check the printer.

Look in the main window of the Print Manager to make sure the printer is activated.

1-26

User’s Manual