Adding Paper Sources
Adding Paper Sources
Selecting the Ethernet Interface
The printer’s standard interface is parallel. While the Ethernet interface board is installed, the printer automatically detects that the computer is using the Ethernet interface.
Ethernet Specifications
The table below shows the physical specifications of the Ethernet interface.
Specification | Description |
|
|
|
|
The span of | Max. 185 meters |
| (coaxial, bus connection) |
The span of | Max. 100 meters |
| |
Speed of data transmission | 10M bits/second |
|
|
Paper Feeder
If you switch paper sizes frequently, you may want to add a second paper source. Or you may simply wait to increase the paper capacity of your printer. You can easily do this by installing an optional paper feeder which consists of a base frame and a paper tray. The paper tray in the paper feeder is identified as tray 2 and the one in the basic configuration is identified as tray 1.
The paper types and sizes used by tray 2 are the same as those for the standard paper tray. The capacity is 500 sheets of 0.09 mm thick paper, twice that of the standard paper tray.
User’s Manual |