Printer Management Utility Program, MarkVision

Printer Management Utility Program, Lexmark’s MarkVision

MarkVision by Lexmark is an integrated software for managing printers, stored in the floppy disk labelled “MarkVision” which is packaged with this manual. It has the following main functions:

•Monitoring the printer

•Displaying the printer status and features (including options) and statistics

•Providing the printer control panel on the computer’s screen (Remote control panel)

These functions are most effective and valuable for remote printers in network environments.

MarkVision is automatically activated when an abnormal condition occurs in the printer. It operates in Windows 95 environments only.

The remote control panel is quite a nice function that enables you to easily and remotely operate the printer even if your printer is set up remotely. MarkVision displays the printer control panel on the computer’s screen and gives you the exactly same functions as available with the control panel of the printer. You can perform a function by clicking a button on the computer’s screen without pushing a button of the printer’s control panel.

Installing MarkVision

To use MarkVision, your computer and its operating environments must be as follows:

•IBM PC/AT or compatible or PS/2

•Microsoft Windows 95 (not Windows 3.1/3.11)

•VGA (640 x 400) or higher display

•Hard disk drive installed (5 MB essential for MarkVision)

•3.5-inch double-sided high density (2HD) floppy disk drive (1.44 MB)

MarkVision is supplied with three 3.5 inch double-sided high density (2HD) floppy disks (1.44 MB, 512 bytes/sector). Consult your dealer when your computer does not have the corresponding floppy disk drive.

To install MarkVision files and start MarkVision, follow these steps:

2-6

User’s Manual