Periodic Routine Maintenance
Use the cleaning brush supplied with the printer. This
Remove the print unit and store it in a dark, level, steady place. Be careful not to damage the green drum surface. Using the tool as
shown in this figure, clean MAINTENANCE the corona wire. Fit the
positioning cut onto the wire housing frame and gently move the tool left and right two or three times along the length of the wire to remove any dirt or other substance. Be careful not to break or otherwise damage the wire.
After you have cleaned the printer, install the print unit and close the upper door.
Cleaning the Paper Guide before the Corona Wire
Perform this procedure when printouts show small spots of toner smudging especially near the top edge of paper.
Open the upper door and remove the print unit. Be careful not to damage the green drum surface. Look for dust on the paper guide before the corona wire. Use a clean, lint free cloth to gently remove any dust from the entire surface of the paper guide.
User’s Manual |