Agilent Technologies 6287 manual Resetting All Options to Factory Defaults

Page 10-2 6287 ULTRA User’s Manual

All configuration option sequences take the following format on one line in the file:

Option # - equals sign (=) - valid option parameter selection. For example:

To set infinite line length (Option #1), put this line in the file:

1=0

To select EBCDIC output (Option #10):

10=B

To disable Intervention Required (Option #26):

26=N

Valid option parameters will be one of the following, depending upon the option:

•A decimal numeric value (0-255)

•A two-character hexadecimal value (00-FF)

•The letter value of an option parameter (A- E)

•A “Y” for YES or an “N” for NO (Y or N)

After the user’s selections are keyed on the screen, press the Print Screen key (or device equivalent) on the alternate host. The ULTRA will interpret each command and store the new selections in its non-volatile, battery- backed RAM. This is a form of permanent storage that will hold the selections even when the unit is powered off.

The command sequences will not be printed. They will affect only the configuration of the ULTRA.

The user is advised to exercise care when entering configuration changes from an alternate host. No error messages will be displayed if an entry is invalid.

Resetting All Options to Factory Defaults

To reset all options to factory preset default values, send the following command (a dollar sign) to the ULTRA, or the user may send a zero (0) follwed by a semicolon (;):

$ or 0;

Note: This command will reset all General Configuration options, all programmable function strings and all translate tables to their factory presets. All modifications to any parameters will be lost.