Agilent Technologies 6287 manual Laserpage Support, Xerox Graphic Window Support

Page 5-14 6287 ULTRA User’s Manual

59 — Laserpage Support

Determines whether or not the ULTRA supports Laserpage, a software product that allows IBM AFP data streams to be printed to Xerox and Hewlett-Packard laser printing systems. Laserpage uses a transparency mode similar to pseudo transparency mode, but with repeat count capabilities. The default value is “No.” If using Laserpage, set this option to “Yes.” Refer to Section 11 — Transparency Modes for more information.

Note: If this option is set to “Yes,” Option #1 — Column width should be set to 0 (infinite line length), Option #2 — Lines Per Page should be set to 0 (infinite page length), and Option #15 — Bold Print Emulation should be set to C (none). Otherwise, unpredictable formatting errors could occur. Refer to Section 12 — DisplayWrite 370 Support for more information.

60 — Xerox Graphic Window Support

Determines whether or not the ULTRA supports Graphic Windows, a feature of Xerox printers. The default is value “No.” Refer to Section 16 — Xerox Applications for more information.

Note: This option must be set to “No” if EBCDIC output is selected using Option #10-B or 10-C.

61 — Reserved

This option is reserved.

62 — Allow EBCDIC Font Downloading

Determines whether or not the ULTRA supports the downloading of Xerox EBCDIC fonts. The default value is “No.” Refer to Section 16 — Xerox Applications for more information.

Note: This option must be set to “No” if EBCDIC output is selected using Option #10-B or 10-C.