Agilent Technologies 6287 manual Switch Bank Tables, Switch Bank a Printer Interfacing/Tests

Page 3-6 6287 ULTRA User’s Manual

Setting these switches and pressing the RESET button or powering up the ULTRA will determine whether the ULTRA will operate normally, or whether it can be configured by sending a command sequence from the coax host, from the ULTRA front panel or from an alternate host.

With all three switches in the ON (down) position, a dump of the alternate host data stream can be sent to the printer after pressing the RESET button on the ULTRA front panel.

A translate table report can be sent to the printer by pressing the RESET and CANCEL buttons when dip switch B7 is in the ON (down) position.

Switch Bank Tables

Switch Bank A — Printer Interfacing/Tests

Function	Printer	Printer	Printer				Printer		Buffer
	Port	Test	Parity			Baud Rate			Dump
	A1	A2	A3	A4	A5		A6	A7	A8
Par Out	Up
Serial Out	Down
Normal		Up
Test Print		Down
No parity			Down	Down
Odd			Up	Down
Even			Down	Up
150 baud					Down		Down	Down
300					Down		Down	Up
600					Down		Up	Down
1200					Down		Up	Up
2400					Up		Down	Down
4800					Up		Down	Up
9600					Up		Up	Down
19.2K					Up		Up	Up
Normal									Up
Hex dump									Down