Agilent Technologies 6287 manual Troubleshooting, Connection Tests, Printer Test

Models: 6287

1 202
Download 202 pages 38.21 Kb
Page 53
Image 53

SECTION 4

TROUBLESHOOTING

General Information

This section describes how to print various reports. These reports are used to test the connections between the ULTRA and the other components of the user’s system, and to troubleshoot problems encountered in sending properly formatted documents to the printer. This section also describes how to contact AGILE technical support and how to upgrade the ULTRA firmware EPROM.

Connection Tests

The following tests will verify that proper connections have been made between the ULTRA, the coax host, the printer and the alternate host.

Printer Test

One of the features of the ULTRA is a printer test that can be used to verify the connection between the printer and the ULTRA. To perform this test, put dip switch A2 in the ON (down) position, and press the RESET button on the ULTRA front panel (or power up the unit). Then press the TEST button. The printer will begin printing a continuous stream of the EBCDIC or ASCII character sets from SPACE through DELETE, followed by a CR/ LF.

Allow the printer to output several pages of data, then verify that all of the pages are formatted identically. To end the printer test, put dip switch A2 in the OFF (up) position, and press the RESET button. A sample printer test can be found in the Appendix.

If the report does not print:

Check that both the ULTRA and the printer are connected to a power source, powered on and on line.

Verify that the printer is securely connected to the ULTRA output port with an ULTRA cable (refer to the cable chart in Section 2 — Installation). The cable end labeled DEVICE should be attached to the printer, and the end labeled IC+/ULTRA should be attached to the ULTRA. The ULTRA will not function properly with cables other than those provided by AGILE.

Page 53
Image 53
Agilent Technologies 6287 manual Troubleshooting, Connection Tests, Printer Test

6287 specifications

Agilent Technologies 6287 is a high-performance signal generator specifically designed for advanced electronic testing and measurement applications. Recognized for its robustness and versatility, the 6287 caters to various sectors, including telecommunications, automotive, aerospace, and semiconductor industries. One of its main features is its capability to generate a wide range of frequencies, making it ideal for comprehensive testing of components and systems.

The Agilent 6287 boasts a frequency range extending from 10 MHz to 6 GHz, which allows users to perform tests across a broad spectrum of applications, including RF and microwave devices. Its excellent output power levels provide a significant advantage when dealing with devices requiring high signal strengths for accurate testing. Additionally, the unit supports various modulation techniques, including AM, FM, PM, and pulse modulation. This versatility ensures that engineers can evaluate the performance of devices under different signal conditions, crucial for real-world applications.

Another defining characteristic of the Agilent 6287 is its exceptional phase noise performance, delivering reliable and accurate results. High-phase noise can obscure signal testing results, making the 6287's low levels a critical factor for effective device evaluation. The generator's time domain capabilities add further value, allowing engineers to analyze signals in both frequency and time domains effectively.

With a user-friendly interface, the 6287 simplifies operation while supporting a wide range of programming capabilities. This makes it easy to integrate into automated test setups or to control it via standard programming languages, enhancing flexibility for engineering teams. The device also features advanced synchronization options that facilitate multi-instrument setups, allowing seamless collaboration with other measurement tools.

The Agilent Technologies 6287 is built with robust construction and thermal management features, ensuring reliable performance in demanding environments. Its compact design enables easy installation in test racks or mobile test setups. Overall, the Agilent 6287 signal generator is a powerful tool that stands out in the field of electronic testing, efficiently meeting the evolving needs of modern engineering applications. Its mixture of frequency versatility, modulation support, excellent phase noise performance, and user-friendly operation makes it an indispensable asset for professionals working with complex signal testing scenarios.