4 - Language Dictionary

TRIGger

When the transient trigger subsystem is initiated, this command generates a trigger signal. The trigger will then:

1.Initiate a pending level change as specified by CURRent:TRIGger or VOLTage;TRIGger.

2.Clear the WTG bit in the Status Operation Condition register after both transient and acquire trigger sequences have completed. (WTG is the logical-or of both transient and acquire sequences.)

3.If INITiate:CONTinuous ON has been programmed, the trigger subsystem is immediately re-enabled for subsequent triggers. As soon as it is cleared, the WTG bit is again set to 1.

Command Syntax

TRIGger[:SEQuence1][:IMMediate]

 

TRIGger[:TRANsient][:IMMediate]

Parameters

None

 

Examples

TRIG

TRIG:IMM

Related Commands

ABOR

CURR:TRIG INIT *TRG VOLT:TRIG

TRIGger:SOURce

This command is included for completeness. It selects the trigger source for transient triggers. Since BUS is the only trigger source for transient triggers, this command does not need to be used.

BUS

GPIB device, *TRG, or <GET> (Group Execute Trigger)

 

Command Syntax

TRIGger[:SEQuence1]:SOURce<source>

 

 

TRIGger[:TRANsient]:SOURce<source>

 

Parameters

BUS

 

*RST Value

BUS

 

Examples

TRIG:SOUR BUS

 

Query Syntax

TRIGger[:SEQuence1]:SOURce?

 

 

TRIGger[:TRANsient]:SOURce?

 

Returned Parameters

<CRD>

TRIGger:SEQuence2

TRIGger:ACQuire

Agilent 66312A, 66332A Only

When the trigger subsystem is initiated, these commands generate a measurement trigger signal. The measurement trigger causes the dc source to measure the output voltage and current and store the results in a buffer.

.

 

 

 

Command Syntax

TRIGger:SEQuence2[:IMMediate]

 

TRIGger:ACQuire:[:IMMediate]

 

Parameters

None

 

 

Examples

TRIG:SEQ2

TRIG:ACQ

Related Commands

TRIG:SOUR

TRIG:SEQ2:DEF TRIG:SEQ2:COUN

 

TRIG:SEQ2:LEV:VOLT

TRIG:SEQ2:SLOP:CURR

74

Page 73 Page 75
Page 74
Image 74
Agilent Technologies 6614C, 6634B TRIGgerSOURce, TRIGgerSEQuence2 TRIGgerACQuire, Abor Currtrig Init *TRG Volttrig
Page 73 Page 75

6613C, 66312A, 6631B, 6611C, 6614C specifications

Agilent Technologies, a leader in electronic test and measurement solutions, offers a range of power supplies designed to meet various application needs. Notable models include the 6632B, 6634B, 66332A, 6633B, and 6612C. Each of these units provides unique features and technologies that cater to researchers, engineers, and technicians in the industry.

The Agilent 6632B is a single-output DC power supply that delivers up to 30V and 3A. It is known for its excellent load regulation and low noise, making it ideal for sensitive electronic testing. The model includes built-in voltage and current measurement capabilities, allowing users to monitor output conditions in real time. The 6632B is commonly used in laboratory environments, educational institutions, and manufacturing lines.

Moving to the 6634B, this model offers dual-output capabilities with a maximum output of 30V and 6A. This versatility enables simultaneous powering of two different devices or circuit sections. It also features parallel and series operation options, allowing users to create a custom power supply configuration for specific applications. With a programmable interface, the 6634B simplifies test automation, ensuring efficiency in extensive testing scenarios.

The Agilent 66332A stands out with its precision and high performance. This power supply provides three outputs—two programmable and one fixed—yielding flexible power configurations. Its intuitive user interface allows easy adjustment of voltage and current settings. The device is equipped with extensive protection features to safeguard both the power supply and the connected load against faults. It is an excellent choice for complex testing setups that require reliable power.

The 6633B model offers a high-performance power supply with dual outputs, similar to the 6634B but with enhanced specifications. It can provide up to 40V and 2A per channel, delivering precision for demanding applications. This model is particularly suited for industries focused on high-reliability applications, such as telecommunications and aerospace.

Lastly, the Agilent 6612C is a compact and lightweight power supply providing single-output up to 60V and 2A. This model is designed for simplicity and ease of use, making it an excellent choice for portable applications. The 6612C’s unique characteristics include a compact design and user-friendly controls, which facilitate operation in field settings.

In summary, Agilent Technologies’ power supply models—6632B, 6634B, 66332A, 6633B, and 6612C—offer an array of features that cater to a wide range of testing and research needs, ensuring reliable power delivery in various contexts.
Top Page Image Contents