Language Dictionary - 4
Output Commands
Output commands consist of output and source commands.
Output commands control the output and digital port functions. They also control the output relay on units with Relay Option 760.
Source commands program the actual voltage, current, and digital port output.
OUTPut
This command enables or disables the dc source output. The state of a disabled output is a condition of zero output voltage and a
Command Syntax | OUTPut[:STATe] <bool> [,NORelay] |
Parameters | 0 OFF 1 ON |
*RST Value | 0 |
Examples | OUTP 1OUTPUT:STATE ON |
Query Syntax | OUTPut[:STATe]? |
Returned Parameters | <NR1>0 or 1 |
Related Commands | *RST *RCL *SAV |
OUTPut:DFI
This command enables or disables the discrete fault indicator (DFI) outputfrom the dc source.
Command Syntax | OUTPut:DFI[:STATe]<bool> | |
Parameters | 0 1 OFF ON |
|
*RST Value | OFF |
|
Examples | OUTP:DFI 1 | OUTP:DFI ON |
Query Syntax | OUTPut:DFI[:STATe]? | |
Returned Parameters | 0 1 |
|
Related Commands | OUTP:DFI:SOUR |
|
OUTPut:DFI:SOURce
This command selects the source for discrete fault indicator (DFI) events.The choices are:
QUEStionable | selects the Questionable event summary bit (bit 3 of the Status Byte Register) |
OPERation | selects the Operation Event summary bit (bit 7 of the Status Byte Register) |
ESB | selects the Standard Event summary bit (bit 5 of the Status Byte Register) |
RQS | selects the Request Service bit (bit 6 of the Status Byte Register) |
OFF | selects no DFI source |
Command Syntax
Parameters
*RST Value
Examples
Query Syntax
Returned Parameters
Related Commands
OUTP:DFI:SOUR<source> QUES OPER ESB RQS OFF OFF
OUTP:DFI:SOUR OPER
OUTPut:DFI:SOUR?
<CRD>
OUTP:DFI
55