Airlink101 AR695W IP Mode, My IP Address, My Subnet Mask, Gateway IP, Server IP Address/Name

Parameter	Description
IP Mode	Select the type of how you obtain IP address from your service
	provider here: Static IP Address or Dynamic IP Address.
My IP Address	Enter the IP address assigned by your ISP if you select Static IP
	Address.
My Subnet Mask	Enter the Subnet Mask assigned by your ISP if you select Static
	IP Address.
Gateway IP	Enter the Gateway IP address assigned by your ISP if you select
	Static IP Address.
Server IP Address/Name	Enter the IP address of the PPTP server.
PPTP Account	Enter the User Name for your PPTP account here. You can
	obtain this information from your ISP.
PPTP Password	Enter the password for your PPTP account here. You can obtain
	this information from your ISP.
Connection ID	Enter the connection ID if your ISP requires it. This is optional.
Maximum Idle Time	The amount of time of inactivity before disconnecting your PPTP
	session. Set it to zero or enable “Auto-reconnect” to disable this
	feature.
Connection Control	There are 3 modes for you to control the Internet connection:
	Connect-on-demand:Router will connect to the ISP when its
	client send outgoing packets.
	Auto Reconnect (Always-on):Router will keep the connection
	to the ISP after the connection is established.
	Manually: Router will not connect to the ISP until user clicks the
	Connect button on the Status-page.

Maximum Transmission Unit (MTU) Most ISPs offer MTU value to users. The default MTU value is 0 (auto).

35