Airlink101 AR695W manual Outbound/Inbound, Packet Filter, Block List, Source IP, Destination IP

Computers with IP addresses between 192.168.2.20 to 192.168.2.50 have no restriction on accessing any network services, while others computers are all blocked. Meanwhile, computers with IP addresses between 192.168.2.100 to 192.168.2.199 are allowed to send Email (port 25), receive E-mail (port 110), and browse Internet (port 80).

For each rule, you can define:

•Source IP address

•Destination IP address

•Destination port address

•Protocol: TCP or UDP or both.

Parameters	Description
Outbound/Inbound	Check/uncheck Enable to enable/disable the Packet Filtering.
Packet Filter	Outbound Filter applies on all outbound packets but Inbound
	Filter applies only on packets that are destined to Virtual Servers
	or DMZ host.

Allow / Deny all to pass except those match the following rules

Block List

Please select “Allow” or “Deny” to decide the behavior of packet filtering table. If you select allow, all traffic will be allowed except the Source IP addresses listed in filtering table will be rejected to connect to the destination IP addresses and ports. If you select deny, all traffic will be denied except the Source IP address listed in filtering table will be allowed to connect to the destination IP addresses and ports.

Select a network service you wish to block, a schedule rule and ID#, click “Copy to”. The settings you selected will be filled into the specific ID.

Source IP	Please input the client’s IP address you wish to apply the filtering
	rule. You can input a single IP address (192.168.2.10) or a range
	of IP addresses (192.168.2.10-192.168.2.50). Leaving this field
	blank indicates all IP addresses.
Destination IP	Please input the Destination IP address (i.e. an FTP site, Email
	server, etc.) you wish to apply the filtering. You can input a single
	IP address (192.168.2.10) or a range of IP addresses
	(192.168.2.10-192.168.2.50). Leaving this field blank means all
	IP addresses.

59