Airlink101 AR695W manual Virtual Computers, Connection Control, Global IP, Local IP, Enable

	session. Set it to zero or enable “Auto-reconnect” to disable this
	feature.
Connection Control	There are 3 modes for you to control the Internet connection:
	Connect-on-demand:Router will connect to the ISP when its
	client sends outgoing packets.
	Auto Reconnect (Always-on):Router will keep the connection
	to the ISP after the connection is established.
	Manually: Router will not connect to the ISP until user clicks the
	Connect button on the Status-page.

Maximum Transmission Unit (MTU) Most ISPs offer MTU value to users. The default MTU value is 0 (auto).

3.1.1.2 Virtual Computers

Virtual Computer enables you to use the original NAT feature, and allows you to set up the one-to-one mapping of multiple global IP addresses and local IP addresses.

Parameter	Description
Global IP	Enter the global IP address assigned by your ISP.
Local IP	Enter the local IP address (virtual IP address) of your LAN
	computer corresponding to the global IP address.
Enable	Check Enable box to enable the Virtual Computer mapping rule.

37