Static Routing | Select Enable or Disable to enable or disable Static Routing |
| function. |
Destination | Enter a destination IP address. The Destination IP is the address |
| of the remote network or host to which you want to assign a static |
| route. |
Subnet Mask | Enter the subnet mask. The Subnet Mask determines which |
| portion of a Destination IP address is the network portion, and |
| which portion is the host portion. |
Gateway | Enter the gateway IP address. This is the IP address of the |
| gateway device that allows for contact between the Router and |
| the remote network or host. |
Hop | Specify the number of next hop. |
Enable | Check or uncheck Enable to enable or disable the static routing |
| rule. |
Click on Save after you finished all settings.
82
