3.4.5 SNMP
Parameter | Description |
|
|
Enable SNMP | You must check either Local or Remote or both to enable SNMP |
| function. If Local is checked, this device will response request |
| from LAN. If Remote is checked, this device will response request |
| from WAN. |
Get Community | Setting the community of GetRequest your device will response. |
Set Community | Setting the community of SetRequest your device will accept. |
IP 1~4 | Input your SNMP Management PC's IP here. User has to |
| configure to where this device should send SNMP Trap message. |
SNMP Version | Please select proper SNMP Version that your SNMP |
| Management software supports. |
Click on Save after you finished all settings.
79
