MAINTENANCE

MAIN CV DRIVELINE SAFETY SHIELD

To remove the outer CV cone, remove the locking screws from shield cone. Remove cone over yoke. Figure Mnt-R-0038Remove bearing ring and remove the locking screws from inner shield cone. Figure Mnt-R- 0038. Turn inner cone to assembly position and remove half shield. Remove bearing ring. FIGURE MNT-R- 0038.

To assemble outer CV driveline, grease yoke groove and inner profile tube. Attach bearing ring on groove with recesses facing profile tube. FIGURE MNT-R-0039.Slide on half shield with cone. Turn cone until it engages correctly. FIGURE MNT-R-0039.Tighten locking screws. Grease bearing groove in double yoke. FIGURE MNT-R-0039.Insert bearing ring. Slide guard cone for double yoke over cam from the connecting end. Make sure holes for screws are visible. FIGURE MNT-R-0039.Tighten locking screws. FIGURE MNT-R-0039.

EAGLE 15 03/09

Maintenance Section 5-7

©2009 Alamo Group Inc.

MAINTENANCE

Page 151
Image 151
Alamo EAGLE 10/15 manual Main CV Driveline Safety Shield