Alamo EAGLE 10/15

MAINTENANCE

EAGLE 15 03/09 Maintenance Section 5-10

MAINTENANCE

Figure MntP-R-0014) Grease and install the sleeve

baring in groove at the end of the sleeve (only on

one half shaft).

Figure MntP-R-0015) Slide the shield tube

assembly over the shaft, so that the bearing holes

in the shield align with the shield b ear ing groo ve on

the yoke.

Figure MntP-R-0016) Install two shield bearings per

half shaft by pushing one bearing in each bearing

hole. The shield bearings should be installed in the

direction of the shaft rotation relative to the shields

Figure MntP-R-0017) Attach safety decal as

needed.