Alamo EAGLE 10/15 manual Gearbox Tools For Disassembly and Assembly

MAINTENANCE

MAINTENANCE

Gearbox Tools For Disassembly and Assembly

1.Caulking Gun w/Silicon

2.Impact Wrench6.

3.Chisel 3/16" wide Blade

4.Ball Pin Hammer

5.Torque Wrench

6.3/16" Punch

7.10mm, 14mm & 17mm Socket

BE CERTAIN TO CLAMP OR SECURELY SUPPORT THE GEARBOX AND SUB- ASSEMBLIES TO PREVENT INJURIES TO HANDS AND FEET DUE TO INADVERTENT DROPPING OR FALLING OVER.

ALWAYS WEAR SAFETY GLASSES AND GLOVES TO PREVENT EYE AND HAND INJURY WHEN CHISELING OR HAMMERING ON METAL COMPONENTS. HARDENED METAL WILL CHIP UN-EXPECTEDLY.

AN ASSEMBLED GEARBOX IS QUITE HEAVY. USE A HOIST OR GET HELP TO HANDLE THEM SAFELY. LIFT CAREFULLY AND PROPERLY USING YOUR LEGS TO LIFT - NOT YOUR BACK.

NOTICE: REFER TO OPERATOR’S MANUAL FOR INSTRUCTIONS FOR PROPER RE-ASSEMBLY ONTO THE CUTTER DECK. TIGHTEN CORRECTLY.

EAGLE 15 03/09 Maintenance Section 5-20

©2009 Alamo Group Inc.