MAINTENANCE

MAINTENANCE

STEP 9

After Gear adjustment is complete the Input Cap and the Gaskets should be removed from the Main Housing. The Gaskets should be installed on the Input Cap. Apply a small bead of Silicon on the Gaskets and the flange of the Input Cap. FIGURE Mnt-R-0072. Place the Input Cap back on the Main Housing and install all eight Bolts and tighten them to a torque of 31 to 34 fast pounds. FIGURE Mnt-R-0073.

STEP 10

Remove the Hub Cap and Shims Install the Gaskets onto the Hub Caps. Apply a small bead of Silicon on the Gaskets and around the flange of the Hub Cap. FIGURE Mnt-R-0074.Install the Hub Cap assembly back on Main Housing and install all eight Bolts. Tighten to a torque of 31 to 34 foot pounds. FIGURE Mnt-R-0075.

EAGLE 15 03/09

Maintenance Section 5-28

©2009 Alamo Group Inc.

Page 172
Image 172
Alamo EAGLE 10/15 manual Maintenance