Carrier PC211 specifications Scheduled Maintenance, Service Ontime

Scheduled Maintenance

Establish a regular maintenance schedule based on the actual machine requirements such as machine load, run hours, and water quality. The time intervals listed in this section are offered as guides to service only.

Service Ontime

The LID will display a SERVICE ONTIME value on the Status01 table. This value should be reset to zero by the service person or the operator each time major service work is completed so that time between service can be viewed.

Inspect the Control Center

Maintenance is limited to general cleaning and tightening of connections. Vacuum the cabinet to eliminate dust build-up. In the event of machine control malfunctions, refer to the Troubleshooting Guide section for control checks and adjustments.

CAUTION ! CAUTION

Be sure power to the control center is off when cleaning and tightening connec- tions inside the control center.