Carrier PC211 specifications Normal Run with Reset, Temperature, or Demand

Table 10H — Normal Run with Reset, Temperature, or Demand

Primary Message	Secondary Message	Probable Cause/Remedy
Running — Reset Active	4-20MA Signal
Running — Reset Active	Remote Sensor Control	Reset program active based upon Config table
		setup.
Running — Reset Active	CHW Temp Difference
Running — Temp	Leaving Chilled Water	Default method of temperature control.
Control
Running — Temp	Entering Chilled Water	ECW control activated on Config table.
Control
Running — Temp	Temperature Ramp Loading	Ramp loading in effect. Use Service1 table to
Control		modify.
Running — Demand	By Demand Ramp Loading	Ramp loading in effect. Use Service1 table to
Limited		modify.
Running — Demand	By Local Demand Setpoint	Demand limit setpoint is < actual demand.
Limited
Running — Demand	By 4-20MA Signal
Limited		Demand limit is active based on Config table
Running — Demand	By CCN Signal	setup.
Limited
Running — Demand	By LoadShed/Redline
Limited
Running — Temp	Hot Gas Bypass	Hot Gas Bypass is energized. See Surge Preven-
Control		tion in the Control section.
Running — Demand	By Local Signal	Active demand limit manually overridden or
Limited		Status01 table.
Running — Temp	Ice Build Mode	Machine is running under Ice Build temperature
Control		control.