MAINTENANCE
MAINTENANCE
TO DISASSEMBLE UNIVERSAL
JOINT
1.Remove all snap rings.
2.Position joint in loose vice, strike top arm of unsupported yoke to drive the top cup up. Repeat on opposite side.
3.If you cannot grip the loosened cap per Step 4, use a pointed tool to tip a needle them repeat Step 2.
4.Grip loosened cup in vise, strike yoke arm to drive yoke off cup. Repeat on opposite cup.
5.Support cross in loose vise and strike yoke arm. Repeat Step 4 to remove remaining two cups.
Eagle 20 03/09 | Maintenance Section |
© 2009 Alamo Group Inc.
