Alamo Eagle 20, Eagle 14 manual Chain Guard Attachment, Single Chain Guards

ASSEMBLY

ASSEMBLY

Chain Guard Attachment

CHAIN GUARDS: Front and Rear Chain Guards (Optional Equipment at extra cost) are recommended for higher than normal usage (100 hours or more per year) and will provide protection from thrown objects with careful operation. Chain Guards must be maintained in good repair by replacing missing or worn sections or by replacing completely when worn or damaged.

The placement of the Chain Guards corresponds to the Rubber Deflector Attachment with the exception of the Front Center Section see FIGURE Asm-R-0122&0133. Attach all Chain Guards with bolts and locknuts specified in the parts list.

Single Chain Guards

Attach Chain bracket(1) to deck with 1/2" x 1-1/2" bolt (5), washer (3), and locknut (4),. see.FIGURE

Asm-R-0133.

Double Chain Guards

Attach chain brackets (1) & (6) to deck with 1/2" x 3- 1/4" bolt (5), washer (3), and locknut (4), and spacer (2) see.FIGURE Asm-R-0122.

Eagle 20 03/09 Assembly Section 3-10

© 2009 Alamo Group Inc.