Alamo Eagle 20, Eagle 14 manual Maintenance, Lubrication

MAINTENANCE

MAINTENANCE

Before operating your Rotary Cutter, make sure it is properly lubricated and thoroughly inspected. Only a minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and trouble free operation.

Always disengage the PTO before raising the Rotary Cutter for transporting or making adjustments.

Lubrication

Do not let excess grease collect on or around parts, particularly when operating in sandy areas. The illustrations below shows lubrication points. The chart gives the frequency of lubrication in hours, based on normal operating conditions. Severe or unusual conditions may require more frequent lubrication (Figure

MntP-R-0003).

Use Multi-Purpose Gear Oil P/N 00786250 for all locations shown according to instructions. Be sure to clean the fitting thoroughly before using grease gun. Failure to maintain proper lubrication will result in damage to U- joints, gearbox, and/or driveshaft.

Eagle 20 03/09 Maintenance Section 5-2

© 2009 Alamo Group Inc.