Alamo Eagle 20 manual Axle Adjustment Rod Attachment, Center Axle Hydraulic Cylinder Attachment

ASSEMBLY

ASSEMBLY

Axle Adjustment Rod Attachment

Attach the Axle Adjustment Rod w/Bushings (1) to the Center Axle (2) and Wing Axle (3) with bolts and locknuts (4). Install Spacers (5) as shown. FIGURE

Asm-R-0018.

Center Axle Hydraulic Cylinder Attachment

Install the clevis rod end (1) of the 8" stroke Hydraulic Cylinder to the lug on the Center Axle (2). The clevis base fastens between the flats on Spring Assembly (3) on the Center Section. Image AsmP-

R-0005.

Wing Section Hydraulic Cylinder Attachment

Mount the 14" stroke Hydraulic Cylinder butt clevis to the upright lugs on the Center Section and the rod end to lugs on wing. Make sure the ports of the Hydraulic Cylinder are facing upwards. Keep the ports capped until the hoses are attached to the tractor and are ready to attach to the cylinder ports. Make certain that the Restrictor ,(A) in Image Asm-R-0019,is installed properly on the gland end of the Hydraulic Cylinders to prevent fast lowering of the wings. Install the Transport Bars to retain the Wing Sections in the upright position for transport on roads and highways. When in transport keep the Center Section as low to the ground as possible to increase stability but high enough to prevent the Skid Shoes from dragging.

Eagle 20 03/09 Assembly Section 3-6

© 2009 Alamo Group Inc.