Alamo Eagle 14, Eagle 20 manual Assembly of WW75-340

MAINTENANCE

STEP 5

The Input Gear and Bearing can be removed from the Input Shaft by tapping the end of the Input Shaft on a solid surface. FIGURE Mnt-R-0052.

The unit is now completely disassembled with exception of Oil Seals and Bearing Races that can be removed by conventional means. FIGURE Mnt-R-0053.

Inspect and replace all worn or defective parts.

Assembly of WW75-340

STEP 1

Install the Bearing Race into the Hub cap. STEP 2

Install the Bearing on the Output Shaft. FIGURE Mnt-R-0054.Place the Shaft into the Hub Cap. FIGURE Mnt-R-0055.Place the Bearing FIGURE Mnt-R-0056on the Shaft and carefully drive it down FIGURE Mnt-R- 0057. Replace any shims found in disassembly, Place the Gear FIGURE Mnt-R-0058on the Shaft so that the threads, for the Adjusting Nut, on Shaft are exposed.

Eagle 20 03/09 Maintenance Section 5-23

© 2009 Alamo Group Inc.

MAINTENANCE