Alamo Eagle 20 Maintenance Section, Starting the Tractor Connecting the Mower to the Tractor

Boarding the Tractor	4-8
Dismounting the Tractor	4-8
STARTING THE TRACTOR	4-9
CONNECTING THE MOWER TO THE TRACTOR	4-10
Connecting the Mower Tongue to the Tractor	4-10
Safety Tow Chain	4-11
Connecting Mower Hydraulic Lines to the Tractor	4-11
SETTING THE MOWER	4-12
Setting Deck Pitch	4-14
Lowest Cutting Height	4-14
DRIVELINE ATTACHMENT	4-16
Driveline Length Check	4-16
Constant Velocity (CV) Driveline	4-18
PRE-OPERATION INSPECTION AND SERVICE	4-19
Tractor Pre-Operation Inspection/Service	4-20
Mower Pre-Operation Inspection/Service	4-20
Cutting Component Inspection	4-24
Blade Bolt Inspection	4-26
DRIVING THE TRACTOR AND IMPLEMENT	4-29
Starting the Tractor	4-30
Brake and Differential Lock Setting	4-30
Operating the Mower Wings	4-30
Driving the Tractor and Cutter	4-32
Crossing Ditches and Steep Inclines	4-33
OPERATING THE TRACTOR AND IMPLEMENT	4-34
Foreign Debris Hazards	4-35
Bystanders/Passersby Precautions	4-35
Engaging the Power Take Off (PTO)	4-36
PTO RPM and Ground Speed	4-37
Operating the Mower	4-37
Shutting Down the Implement	4-41
DISCONNECTING THE MOWER FROM THE TRACTOR	4-41
MOWER STORAGE	4-43
TRANSPORTING THE TRACTOR AND IMPLEMENT	4-43
Tire and Wheels	4-45
Transporting on Public Roadways	4-45
Hauling the Tractor and Implement	4-47
TROUBLE SHOOTING GUIDE	4-49
MAINTENANCE SECTION	5-1
Lubrication	5-2
Tongue	5-4
CENTER & WING GEARBOXES	5-4
DIVIDER GEARBOX	5-5
DRIVELINES	5-6
MAIN CV DRIVELINE SAFETY SHIELD (FIGURE Mnt-R-0032)	5-7
WING DRIVELINE	5-8
TO DISASSEMBLE UNIVERSAL JOINT	5-10
TO REASSEMBLE UNIVERSAL JOINT	5-11
BLADE SERVICING	5-13
BLADE SHARPENING	5-14
BLADE REMOVAL	5-14
BLADE CARRIER REMOVAL	5-15
BLADE CARRIER INSPECTION	5-15
BLADE CARRIER INSTALLATION	5-16