Alamo Eagle 20, Eagle 14 manual Wing Section Attachements, Hose Bracket Attachment

ASSEMBLY

ASSEMBLY

Wing Section Attachements

While the Center Section is still solidly blocked, attach the Wing Sections (1) in the horizontal plane. Using Hinge Pins (2), attach the Right and Left Wing Sections to the Center Sections.

NOTE: Wing Sections may require slight lifting after the Hinge Pin is started to aid pin installation. Lock the Wing Sections in place with the Hinge Pins. Insert 5/16 x 1-1/2 bolt (3) and locknut (4) at the end of each of the Hinge Pins and tighten securely. FIGURE Asm-R-0015.

Hose Bracket Attachment

Hose Brackets are attached in the front and rear of the cutter. The Front Hose Bracket (1) attaches to the Hose Bracket Mounting on the right side of the tongue mount (2) with Bolt (3), Washer (4) and Nut

(5). The Rear Hose Bracket (6) mounts to the Lower Center Axle Spring Mount (7) with Bolt and Locknut (8) Image AsmP-R-0003 and 0004.

NOTE: Retain Rear Hose Support so that the center hoses clear top of SMV Sign.

Eagle 20 03/09 Assembly Section 3-4

© 2009 Alamo Group Inc.