Alamo Eagle 14, Eagle 20 manual Disassembly of Divider Gearbox, Step

MAINTENANCE

Disassembly of Divider Gearbox

(Trained dealer personnel only) STEP 1

Remove all eight of the M10 Bolts from both Cap Hubs, using a 14mm socket. FIGURE Mnt-R-0048. Remove the Hub Assemblies and gaskets from the Main Housing. FIGURE Mnt-R-0048.

STEP 2

Remove the Hub Assembly from the vise and place it on a solid surface with the Gear in an upright position. Using a Hammer, tap this Gear downward until the Adjusting Nuts fully exposed. Remove the Cotter Pin. Remove the Adjusting Nut. FIGURE Mnt-R-0049.

Eagle 20 03/09 Maintenance Section 5-21

© 2009 Alamo Group Inc.

MAINTENANCE