Fill Hydraulic Tank
Fill Hydraulic Tank with Oil:
5.Fill Tank. Fill the Hydraulic Tank (See Figure 35) Fill tank till the Oil is visible in the sight Gauge (See Figure 33 & 34). This will fill tank for the start but it will have to filled again later. Read Step 6 a must.
6.Fill Suction Hose with Oil.
This is an important step that must be done. Remove the Suction Hose at the Tank (See Figure 6) and fill the hose with clean oil, THIS IS A MUST DO. The Suction Hose must be filled with Oil to prevent Dry start up of Pump. Dry start up of PUMP can damage the Pump. After filling suction Hose reinstall it and tighten down Hose Clamp.
Pressure
Gauge
Sight Gauge
Figure 33
Figure 34
Oil Level & Temperature Sight Gauge
Figure 35
Switch Blade
© 2005 Alamo Group Inc. | Section 5 - 13 |
