OUTER SHOE ASSEMBLY REPLACEMENT
Outer Shoe Assembly Replacement:
The outer shoe assembly bolts to the last two holes in the cutterbar. There are two different length bolts used here because the last bolt will also mount the outer shoe sole to the outer shoe assembly.
These are 7/16" grade 5 carriage bolts and will torque 45 to 50 ft. lbs. The outer shoe sole is a replaceable wear item and be replaced as needed without disas- sembly of the cutterbar (See Figure 15 & 16).
Inner Shoe Replacement:
The inner shoe bolts to the
Rock Guard, Clip & Wear Plate Replacement:
The rock guards, clip and wearplates can be replaced without removing that cutterbar or knife bar assembly. They are bolt on items that can be bolted one at a time for repair or they can all be replaced all at the same time. Anytime the guards, clips or wearplates are replaced they will have to be checked to make certain they are fitting correctly. See the guard, clip and wearplate adjustment section on previous pages. The bolts mounting rock guards are 7/16" grade 5 plow bolts and will torque 45 to 50 ft. lbs (See Figure 16)
Cutter Bar
Outer Shoe Asy
Outer Shoe Sole
Figure 15
Figure 16
Figure 17
Figure 18
Switch Blade
© 2005 Alamo Group Inc. | Section 7 - 8 |
