General Information / Installation Requirements
WARNING! Wear personal protective equipment when assembling the mower. As a minimum that should include:
Safety Glasses | Safety Shoes | Gloves |
Hard Hat | Hearing Protection | Welding Helmet |
WARNING!
WARNING!
WARNING!
Before attempting to assemble ensure that the tractor engine is off and the tractor transmission is in the park position with the parking brake engaged.
Remove the engine key and keep it in your pocket to prevent inadvertent starting or movement of the tractor.
Place wheel blocks in front and behind the tractor wheels to prevent the tractor from moving.
Never attempt to start the tractor unless properly seated in the tractor seat with the seat belt fastened around you.
Never attempt to operate the tractor and mower controls unless seated in the tractor seat with the seat belt fastened around you.
Securely block up and support the tractor before attempting to loosen and move the tires. Failure to properly block up the tractor can result in the tractor to suddenly move or fall, crushing you or another worker.
Never work under any raised component or any component that is not securely blocked up or supported.
Many components of this mower are very heavy and must be handled by proper material handling equipment. Do not lift components that weight over 50lbs by yourself.
Use an overhead crane, forklift, or other coworkers to lift heavy items. Ensure lifted components are securely supported.
Never walk or work under a lifted component.
WARNING!
WARNING!
Use extreme care when moving, handling or adjusting the tractor tires. The tires are extremely heavy and could fall and crush you
Use an overhead crane or forklift to move the tires.
Properly fasten the tires to the material handling equipment to prevent the tire from falling.
The hydraulic oil is under high pressure and a hydrauli leak can cause oil to be injected under the skin.
Before starting the tractor ensure all hydraulic connections have bee tightened Never check for leaks with your hands. Use a piece of wood or cardboard to check for the leak making sure your hands and face are kept away from the leak area.
Repair any leaks before operating the equipments
Clean up all oil that has leaked according to the requirements of the oil supplier. Oil residue on the ground can result in unjury from slipping or falling.
Switch Blade
© 2005 Alamo Group Inc. | Section 2 - 5 |
