Chapter 6: Modulation and Envelopes
164 ANDROMEDA A6 REFERENCE MANUAL
MOD Pages
In addition to the modifications offered by the TRIG and DYN pages, each envelope
can be modulated by any of the A6’s 71 mod sources. In fact, three separate mod
paths can be created per envelope from the three MOD 1, MOD 2 and MOD 3 pages. This
provides outstanding versatility in customizing the envelopes to a particular need.
MOD 1, MOD 2 and MOD 3 are identical, so the following table applies to all three:
PAGE PARAMETER
OPTIONS
or RANGE DESCRIPTION
MOD 1
MOD 2
MOD 3
SOURCE Any of the A6’s 71
modulation sources.
See Appendix B.
Use soft knob 1 to scroll through the list of
possible modulation sources.
LEVEL -100 ··· +100 This parameter sets the amount of modulation
that will affect the selected destination. Keep in
mind that negative values invert the action of the
selected source. For example, if Velocity is the
source and a negative value for LEVEL is used,
playing harder will reduce the level of the
destination.
OFFSET -100 ··· +100 This parameter sets the offset or fine adjustment
for the selected modulation level.
ENABLE OFF, ON This parameter is used to turn the selected
modulation on or off. Use soft knob 5 or the
panel buttons along the upper edge of the ENV 1,
ENV 2 and ENV 3 sections.
DEST
Destination
DELAY TIME
ATTACK TIME
DECAY 1 TIME
DECAY 2 TIME
REL 1 TIME
REL 2 TIME
ENV LEVEL
SUS LEVEL
Use soft knob 2 to scroll through the list of
possible modulation destinations. These
destinations are eight envelope parameters
described earlier in this Chapter.