Chapter 2: Playing the A6
ANDROMEDA A6 REFERENCE MANUAL 75
Sequencer CONFIG Parameters
PAGE PARAMETER
OPTIONS
or RANGE DESCRIPTION
CONFIG
Sequencer
Configuration
LOCBPM 0.46 ···
600.00
The tempo of the Sequencer displayed in beats
per minute.
When LOCAL is selected on the SYNC page , the
sequencer will use this value for the tempo. If
CLOCK or MIDI is selected on the SYNC page,
this parameter has no effect.
KYTRIG OFF, ON When ON, the sequencer will play a the A6’s
voice(s) when a note or chord is played. This is
the most common usage of the sequencer. The
NOTE, VEL and GATE values are also available as
mod sources.
When OFF, the sequencer will not play a the
A6’s voice(s) when a note or chord is played.
The A6 behaves as if the sequencer isn’t
running, but NOTE, VEL and GATE values are
still available as mod sources.
LENGTH 1 ··· 16 Selects the number of Steps that the sequencer
will play from 1 to 16 (Steps A through P).
LPTYPE
Loop Type
This parameter determines how the sequence
“loops” or cycles.
FORWRD The sequence plays forward through the
selected Steps.
REVERSE The sequencer cycles backward through the
selected Steps.
ROKROL Rock-n-Roll: The sequence cycles backward and
forward through the Steps.
LPCNT
Loop Count
When the sequencer is running, this parameter
determines the number of times the sequence
will loop through the Steps, or turns it OFF:
1 ··· 240 Sets a finite number of loops from 1 to 240
repititions.
SUSTN The loop will continue to cycle as long as notes
are being played or the Sustain Pedal is down.
MONLEG
Mono Legato
OFF, ON When ON, this parameter allows the sequence to
be transposed in the middle of its cycle when
you play legato.
ZOOM
Sequencer Zoom
OFF, ON When ON, the sequencer graph will be
magnified so you can see smaller note changes.
USEKBD
Use Keyboard
OFF, ON When ON, this allows you to enter sequencer
notes using the A6’s keyboard.