8.Move to the “Drivers” tab. Click on each input pair and also on the output pair to make them available to Sonar. The available input channels (corresponding to the MasterControl’s input channels) will depend on the sampling rate, which you can set in the “General” tab. There will always be three available output channels, which correspond to the three stereo pairs of physical outputs (1/2, 3/4, and 5/6) on the MasterControl. Note that the options will always be odd- numbered channels as each channel shown actually corresponds to a stereo pair of channels on the MasterControl.
9.Click “OK” to close the “Audio Options” window and begin recording.
10.See the SONAR notes later in this manual for details on MasterControl operation with SONAR.
25
