2.DIRECT MON LEVEL – This knob raises or lowers your entire direct monitor mix. This allows you to blend your direct monitor signals with the audio being played from your computer.
3.OUTPUT
4.HEADPHONE 1 / 2 – These knobs control the volume for the corresponding HEADPHONE 1 and 2 outputs on the rear panel. You can select which stereo channels are routed to these outputs in the Global Menus (see the GLOBAL MENUS section for more information).
5.SPEAKERS / OUTPUTS – These buttons mute or activate output from each of the three physical analog output pairs. To switch a stereo mix between multiple sets of speakers, set each of the three output pair sources in the global menus to OUTPUT 1/2.
6.TALKBACK – Pressing this button will let you speak into the
7.LED METERS – These meters measure the audio signal level of the Output Source 1/2 sent from your computer software to the MasterControl.
(G)CONFIGURATION CONTROLS
1.DISPLAY – Information related to the MasterControl’s functions will be shown in this display. This includes functions currently being adjusted, pages in menus, knob settings, volume levels, the current bank or track, etc.
2.VALUE / ENTER – Turn this knob to scroll through the various options shown in the DISPLAY. Push the knob to enter your selection.
| 3 |
|
1 | 4 | 2 |
| ||
| 5 |
|
6 |
|
|
3.PRESET / HOME – Press this button to enter (or exit) Preset Selection. Use the VALUE / ENTER encoder to scroll through the Presets to find the one corresponding to your DAW. Press the encoder to select the preset. Do this before you open your DAW. The Presets are as follows:
yPreset 1: Cubase / Nuendo
yPreset 2: Ableton Live
yPreset 3: Cakewalk Sonar
yPreset 4: Logic Pro
yPreset 5: Samplitude
yPreset 6: Digital Performer
yPreset 7: Alesis HD24
yPreset 8: ProTools
yPreset 9: Reason
yPreset 10: Soundtrack Pro
yPreset 11:
yPreset 12:
10
