Nameplate Location

The nameplate is located on the back of the machine and is programmed in the UniLinc Control. To access Machine ID through the control:

1.Press and hold , then , then keypads at the same time.

2.Press the keypad until Diagnostic is highlighted.

3.Press the keypad.

4.Press the keypad until Machine ID is highlighted.

5.Press the keypad.

Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1.

EXAMPLE OF MACHINE NAMEPLATE LOCATION

1

2

Introduction

Replacement Parts

If literature or replacement parts are required, contact the source from which the washer-extractor was purchased or contact Alliance Laundry Systems LLC at (920) 748-3950 for the name of the nearest authorized parts distributor. A parts manual may be ordered by returning the reply card provided with each washer-extractor.

Customer Service

For technical assistance, contact your local distributor or call:

(920)748-3121 Ripon, Wisconsin

A record of each washer-extractor is on file with the manufacturer. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1.

PHM1400C

1In UniLinc Control

2At back of machine

Figure 1

F8138801

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

11