Diagnostic

Inputs Outputs Menu

Outputs:

S1

S2

S3

 

S4

AX1

HF

CF

FW

RV

SP1

ON

HT RUN REV SPD1 SPD2 SPD3

HS

CS

RFA

RFB

RDB

AX3

AX5

DR

AX4

AX2

ES1 ES2

ES3

ES4

ES5

ES6

ES7

ES8

Inputs:

 

DR BAL PAUS DFLT FSW WL

RS TS DL

OSW PSW

 

Inputs Outputs

RUNNING

 

PHM1059R

Figure 65

 

When the Inputs Outputs Menu is accessed through the Diagnostic Menu, the user can change outputs. The Close Door Menu will come up if the door is not closed. The user can scroll through the outputs using any of the arrow keys, the cursor is indicated by flashing the active output on the screen. The user must

“setup” the outputs to be turned on. The keypad is used to toggle individual outputs to be turned on or

off. After the keypad is pressed the control will

turn the selected outputs on and display the text “RUNNING”. The outputs cannot be toggled until

the keypad is pressed. The text “RUNNING” is

no longer displayed. The screen will still show the selected outputs on the screen and the user can again

toggle outputs to be turned on or off. If the

keypad is pressed at any time during this test, the control will turn off all outputs if the test is running or return to the previous screen if the test is not running.

52

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F8138801