Alliance Laundry Systems PHM1401C Factory Valve Purge Menu, Test Balance Weight Menu, Press START, to Begin, Press START, to Begin

Factory Valve Purge Menu

FACTORY VALVE PURGE

Press START

to Begin

Factory Valve Purge

PHM1057R

Figure 63

The Factory Valve Purge Menu is used to allow the factory to purge all the valves inside the machine after the machine has been manufactured and tested.

Press the keypad to activate the step. The step

will run for five (5) minutes unless the keypad is pressed.

Diagnostic

Test Balance Weight Menu

TEST BALANCE WEIGHT

Press START

to Begin

Balance Input Status

PASS

Test Balance Weight

PHM1285R

Figure 64

The Test Balance Weight Menu is used to check and display the current machine balance type and its status. The machine must be equipped with a variable frequency motor drive. The display shows the balance switch status: CLOSED, 1 Hz, 2 Hz, 3 Hz, or OPEN.

The keypad initiates the test. Press the

or keypad to end the test. A UNLOCK key press command will be recognized while the test is not in

operation. Press the or keypad again and the display to return to the Test Menu.

F8138801 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 51