Lubricate Bearings Menu
Lubricate Bearings!
Machine Cycle Definition and Operation
Run Diagnostic Menu
200 Hours Have Elapsed
Speed, Temp
and Level
Alarms
Inputs and
Outputs
Machine ID
PHM1009R
Figure 11
The Lubricate Bearings Menu displays when the machines has run for 200 hours and the bearing is the type that can be lubricated. The Lubricate Bearings Menu displays during Idle Mode when the Cycle Menu is displayed. The Lubricate Bearing Menu and Cycle Menu will alternate being displayed.
To remove the Lubricate Bearings Menu from being shown during Idle Mode, the user must reset the bearing timer by navigating to the System Menu and reset the bearing timer. Press any keypad to display Cycle Menu while viewing Lubricate Bearings Menu.
Run Diagnostic Menu
PHM1010R
Figure 12
The Run Mode Diagnostic Menu allows user to access diagnostic information of the cycle currently running. The menu contains speed, temperature, water level, inputs and outputs, alarms, and machine ID.
While machine is running, press the 
keypad to enter Run Diagnostic Menu.
Press the 
, 
, 
, or 
keypad to navigate the menu.
Press the 
keypad to choose selection.
If the 
keypad is pressed, display enters Run
Menu. If nothing is selected for 15 seconds, the display will return to Run Menu.
F8138801 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 23 |