Programming UniLinc
System Menu
Program Diagnostic
Laundry |
| Reset Bearing |
Management |
| Timer |
|
|
|
System Menu
PHM1020R
Figure 23
The System Menu allows the user to access: cycle programming, diagnostics, laundry management, bearing timer reset/reset bearing timer.
Press and hold | , then, | , then | to enter |
the System Menu. |
|
|
|
The System Menu is a submenu of the Cycle Menu. The navigation of the System Menu is different from the Cycle Menu. In the Cycle Menu, the highlighted text box was stationary. In the System Menu, the ARROW keypads control the location of the highlighted text box. Text will remain at the same location but the highlighted box will move when the
text box when the | , | , | , and |
keypads are pressed. |
|
|
|
Press the 
keypad to enter selected menu.
Press the 
keypad to return to the Cycle Menu screen.
If the user highlights Reset Bearing Timer and presses
the 
keypad, the text changes to Bearing Timer
Reset and the control resets the total operation time since the bearings were last serviced. This menu item will not be an option on machines that do not have a greasable bearing.
Save Changes Menu
Save Changes?
Yes 
No
PHM1021R
Figure 24
The Save Changes Menu is used to confirm programming changes when modifying a cycle or the parameters of the Global Settings. The Save Changes
Menu will default to Yes. Using the 
or 
keypad will move the cursor between Yes or No. Press
the 
keypad to make a selection. Once the 
keypad is pressed, the display will either return to the Modify Cycle Menu or the Global Setup Menu depending in which submenu the display was in.
30 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F8138801 |