Program Menu

Program Menu

Modify Cycle

 

Global Setup

 

 

 

Program Menu

PHM1022R

Figure 25

In System Menu, select Program and press . To program cycles, select Modify Cycle and

press .

To change properties that will affect the machine globally, select Global Setup (i.e., water temperature Cold to 35°F, will make the cold water temp 35°F for

all cycles) and press .

Press the keypad to return to System Menu.

Modify Cycle

Cycle01: Towels White Bleach

Segment01: Prewash

Modify Cycle

PHM1023R

Figure 26

The Modify Cycle Menu is used to program the cycles. For programming steps, the Modify Cycle Menu changes to the Step Menu.

The Cycle Number will be highlighted when the Modify Cycle is first displayed.

Press the or keypad to change cycle selections.

The cycle can be turned on and off by pressing

the keypad. If the cycle is turned off, the Cycle

Name will display “Off” and the user will not be able to make any changes to the cycle.

Press the keypad to make the highlighted box

move to the cycle name to the right of the cycle number.

Press the keypad to make the display jump to

the End of Segment (EOS) Audio Signal Step Menu of the last segment of that cycle which is programmed “On”.

NOTE: All segments and available steps have to be scrolled through even though they may be shut off. Figure 27 illustrates the flow of the cursor during the programming of a cycle.

To edit a cycle name, select the cycle name and press

the keypad.

The first character of the Cycle Name will have a blinking underscore underneath to display it is ready

for editing. Use the and keypads to select the different characters. After the desired character has

been selected, press the keypad to save the character and move to the next character in the string.

The user may press the keypad to go back a

character. Pressing the keypad when located on

the first character will take the user to the last character of the string, which may be a blank space.

Continue pressing the keypad to move to desired character. The blinking underscore is under the

last character of the string and the keypad is

pressed, the blinking underscore will move to the first character of the string.

Press the keypad to exit string edit mode.

F8138801

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

31