8.2.DC Output (with either 1MRF28H54BV Rectifiers and 1MRF28H54BV50 Rectifiers)
Nominal Output Voltage (factory set) | 54.5 | VDC |
|
|
|
Operating Voltage Range | 44 – | 58 VDC |
|
| |
Rated Output Current (per Rectifier) | 50 A | |
|
| |
Rated Output Power (per Rectifier) | 2800 W (45ºC) | |
|
| |
Efficiency | 91% Typical | |
|
|
|
8.3. Controls and Indicators
Rectifiers
Input Healthy LED | AC power present. |
|
|
Output Healthy LED | DC output voltage within operating range |
|
|
Output Current LED | On when rectifier is supplying current. |
|
|
Thermal Control LED | On when one of three internal sensors is above 90ºC |
|
|
Current Limit LED | On when rectifier is in current limit. |
|
|
Overvolts LED | On when rectifier is above 57 Volts. (Must be powered down to reset) |
|
|
Overtemp LED | On when one of three internal sensors is above 130ºC. Power |
| Conversion is inhibited. |
|
|
Fan fail LED | On when Fan is running too slow. |
|
|
Standby LED | On when the unit is in the standby mode. No output power is |
| produced. Rectifier is still active |
|
|
+V Test Point | Rectifier Voltage can be measured with a voltmeter between COM |
| and +V. |
|
|
COM Test Point | Negative reference for both +V and +I |
|
|
+I Test Point | Rectifier Current can be measured with a voltmeter between COM |
| and +I. |
|
|
MX28B1200/2400 MX28B1200/4800 | Page 61 |