AMX MAX-CSE, MAX-CSD10 manual Launch your web browser

MAX-CSE Web Interface

Save login profile selection box

FIG. 12 Enter Network Password security dialog

There is no limit to the number of concurrent logins allowed on the target MAX unit. By default, the MAX unit is shipped with the following account and access rights:

Default Security Configuration (case-sensitive)

Administrator account:

Username: Admin

Password: 1988

Rights: All

Although the Administrator account can be modified numerous times to alter the username and password required for access, only one login profile can exist on the MAX unit at any given time. The privileges for that single account will always be that of an Administrator.

All login profiles (with associated Username and Password) are each required to have a minimum of four characters and a maximum of 27 characters.

Characters such as # (pound) & (ampersand) and ’ " (single and double quotes) are invalid and should not be used in usernames, group names, or passwords.

Communicating with the Unit via the Browser-Based UI

1.Launch your web browser.

2.Enter the IP Address of the target unit (as seen on the unit’s LCD display) into the web browser’s Address field (FIG. 12).

3.Press the Enter key on your keyboard to initiate communication with the MAX unit and launch the initial on-screen security dialog (FIG. 12).

The MAX unit is shipped in a secured configuration which requires the user to enter a username and password into the on-screen security dialog before gaining access to the UI pages.

4.Enter the words administrator and password into the corresponding User Name/Password fields. This is the factory default security login information. This information can later be changed.

5.Click OK to enter the information and proceed to the first UI page.

20 MAX-CSE/MAX-CSD10 Operation/Reference Guide