AMX MAX-CSD10 manual Wiring the MAX-CSEConnectors and Cables

MAX-CSE and MAX-CSD10 Installation

Wiring the MAX-CSE Connectors and Cables

The rear connectors on the MAX-CSE (FIG. 5) are used to input external multimedia signals and then stream them to the network/web. This stream can be displayed through either a MAX-CSD10 Decoder, VG-Series Modero Touch Panel or through a third-party player such as VLC®.

COMPOSITE IN (BNC)

or

S-VIDEO IN (MiniDin4)

12 VDC power

supply

Outbound Audio/Video/Data (RJ-45)

Ethernet - Data (RJ-45)

RS232/422/485

Right Audio Channel IN

Left Audio Channel IN

F

R

O

N

T

BoxEncoderMAX

-CSE

Microphone IN

IR/Serial

R E A

I/O

R

FIG. 5 MAX-CSE connector wiring diagram

The rear-panel wiring connections are described below (from left to right):

•COMPOSITE IN: Uses a BNC connector to feed a Composite video signal in from an outside video source and then out to an external streaming media display or device via the Ethernet port.

The BNC connector can be modified to receive signals from an RCA connector by using the included BNC to RCA Adapter (41-1074).

This signal can also be fed from a DB15 connector by using an optional NXA-RGBCBL (15-pin to 5X BNC) RGB Breakout cable (FG2250-80).

Note: Although the MAX-CSE can accept either a Composite or S-Video input signal type. If both signal types are detected, the unit (in its default state) will use the Composite signal. This selection can be later changed by the user via the A/V Setup UI page.

•S-VIDEO IN:Uses a female S-Video connector to feed a video signal in from an external video source and then out to an external streaming media display or device via the rear Ethernet port.

	Note: Although the MAX-CSE can accept either a Composite or
	S-Video input signal type. If both signal types are detected, the unit (in
	its default state) will use the Composite signal. This selection can be
	later changed by the user via the A/V Setup UI page.
• PWR	2-pin 3.5 mm mini-Phoenix connector connects to a direct
	12 VDC-compatible power supply.

12 MAX-CSE/MAX-CSD10 Operation/Reference Guide