Table of Contents |
|
A/V | 32 |
Changing Video and Audio Settings | 33 |
NetLinx Settings Page | 34 |
Changing the NetLinx Master Connection | 36 |
IP Settings Page | 37 |
Changing the IP Settings | 38 |
User Page | 39 |
Changing User Settings | 40 |
| 41 |
Communicating with the Unit via the | 43 |
Administration Page | 43 |
Updating Firmware | 43 |
Stream Selector Page | 44 |
Stream | 45 |
Changing the Stream Configuration | 46 |
Setting up an SAP Stream Configuration | 46 |
Setting up an RTSP Stream Configuration | 46 |
Setting up a Manual Stream Configuration | 47 |
Audio/Video Page | 48 |
NetLinx Page | 48 |
IP Settings Page | 49 |
User Page | 50 |
Configuring Communication | 51 |
Reading the Front Panel LCD | 51 |
Configuring the MAX Communication Parameters | 52 |
Obtaining the Unit’s Initial DHCP Address | 52 |
Communicating with the Unit via the | 52 |
Assigning a Static IP Address to the | 53 |
Communicating with the Target Master via an IP | 55 |
Associating the MAX Unit to a Target Master | 57 |
Associating a | 57 |
Changing the MAX’s Device Number | 59 |
Changing the | 59 |
Changing the | 59 |
Recommended NetLinx Device Numbers | 60 |
Using the ID Button to Change the | 60 |
Resetting a | 61 |
Configuration and Firmware Update | 63 |
Before You Begin | 63 |
ii | |
|
|