AMX MAX-CSE, MAX-CSD10 manual A/V Set-upPage, Changing the Encoder Profile, Cancel

MAX-CSE Web Interface

Changing the Encoder Profile

1.From the Stream Profiles page, select an option from the Profile drop-down menu. All but the Custom option contain preset parameters.

2.If you selected the Custom option, select the appropriate options from the Video and Audio sections.

3.If you wish to change the Stream profile, select between RTP and UDP in the Transport Protocol drop-down menu.

4.Change the Target Address, Target Port, and Target Audio Port information, if necessary.

5.Set the SAP Settings:

6.To save your changes, click the Accept button. To return to the previously saved settings, click

Cancel.

A/V Set-up Page

The A/V Set-uppage (FIG. 17) is accessed by clicking on the Audio/Video button in the Navigation Bar. This page allows a user (with the proper access rights) to configure the properties associated with both the incoming video and audio content.

FIG. 17 A/V Set-up page

32 MAX-CSE/MAX-CSD10 Operation/Reference Guide